A.Main date of the whole line 

1Thickness of the material： 0.8-3.0 mm Galvanized steel coil（0.8-3.0.mm Carbon steel coil）
2 Mechanical property：The whole line speed is: 1 piece/3mins
3 Steel coil width：Feeding width is 1250mm
4 Bore range: Φ500-620mm

5 The end product length standard：2030mm/2170mm/2550mm(We also can make the end product according to the drawing）

 

a. Main Configuration and technical process 
The whole line is including 10T hydraulic decoiler, feeding and leveling device, roll forming machine, hydraulic servo punching machine, on line curving machine, corrugated sheet hydraulic cutting machine, output table, hydraulic system and electronic system, etc. 

 A.Machine structure：Torri frame, steel structure base support. 
 B.Drive mode：gearbox drive
 C.Roller step：20 steps 
 D.Main power：30 kw
 E.Main reduction gears：Domestic Famous brandK series bevel reduction gear.
 F.Roller material：GCr15 high-carbon chromium bearing steel，heat treatmentHRC58-62°.

G.Main shaft：Diameter ￠120mm,40Crsteel，with thermal refining treatment,surface with grinding finishing machine. 

 

b.Hydraulic punching device：
A. The hydraulic punching device is including rack, base support, punching mould, hydraulic cylinder and press device, 7.5KW servo motor,precision screw, guide rail, etc. 
B. Punching cylinder diameter￠120X2 2pcs，core pulling cylinder 30 pcs（The QTY of cylinder is according to the punching hole requirement）.

C. Punching mould material：embossing mode is made by SKD11  die steel ，with forge and grinding. HRC58-62°.

 

c. Corrugated sheet on line curving machine
The on line curving machine is using the reliable arc down style structure, two sets of rollers turn to the centre to make the arc lifting motion, to adjust the arc size according to the product requirement. The device has three sets rollers, there are two sets positioning rollers and press roller, the last one is arc roller, there is a floating roll on the top, and two sets rollers are fixed rollers on the bottom. Which is drived by the reduction gears, the motor power is 4KW. 
  
d.Hydraulic cutting blade:
A.Cutting device: The cutting direction( angle of inclination) can be adjusted according to the radius of curvature of the sheet, which can make the blade movement is close to the arc centre. 
B.Cutting power：Hydraulic oli cylinder drive

C.Cutting blade：Copy the corrugated sheet shape blade, material is Cr12 die steel,quenching treatment HRC58-62°.

 

e.Output table：
A.Output table
B.Hydraulic system 1 set, used for punching hole and cutting.
C.Punching hole cutting hydraulic system: work pressure: 20Mpa. Axial plunger pump,，displacement:45ml/rev 
Drive motor power::30KW. Hydraulic system with cooling system
D.The oil cylinder set synchronizer.
E.Hydraulic system has cooling system
F.Pump and control valve is using famous brand of China. 

G.Hydraulic decoiler hydraulic system is standard.

 

B. PLC system
1.Siemens PLC. Danvers frequency converter(Denmark)
2.14 inches touch screen
3.“Setting”picture：According to the process to set punching,arch bending, cutting etc motion programme, setting the length and quantity of the work piece. 
4.“Automatic, Manual”Picture：Selecting operation, and make the machine running according to the order.
5.“Monitoring”picture：can observe the operation 
6.Omron Encoder to fix to do length measurement.
7.There are jerk button on the beginning and the end of the machine, in case to happen the malfunction to emergency shut down to guarantee the system emergency braking. 

8.Setting the short distance back off function. 

 

C. The corrugated sheet technical demands:
1.Total width tolerance:±2mm
2.Total length tolerance:±1.5mm
3.Depth of the wave：±1mm
4.Punching hole distance tolerance:±0.10mm
5.Working speed：1 piece/3mins
G.The whole line weight is about 35T, the whole line power is about 80KW.

 

Decoiler

Machine Structure

Roller Details

Punching System

Cutting System

Output Table

Hydraulic and Electric System